Overview
The anemometer of a Davis weather station should be installed due North. If this is not done, or is not possible, a correction can be made within WeatherLink.com. Instructions on how this can be done are found below.
EnvironMonitor Instructions
- Login to WeatherLink.com and select the weather station that needs to be corrected.
- Next click the "wrench" icon->Device->Device Configuration
- Then click "edit" next to the highlighted ID #
- On the next page click "advanced settings. (see below)
- Finally enter the difference between the install direction and true North in degrees, then click exit.
Vantage Connect Instructions
- Login to WeatherLink.com and select the weather station that needs to be corrected.
- Next click the "wrench" icon->Device->Device Settings
- Finally enter the difference between the install direction and true North in degrees, then click exit.
Comments
0 comments
Please sign in to leave a comment.