AquaSpy Auger Specifications

AquaSpy Auger Specifications

General Information

The ideal installation diameter is 60mm (2.4 inches), if you have that as an option. 

If given the option between a 2.25 inch bit versus a 2.5 inch bit, the 2.5 inch bit should be selected. A 3 inch bit is too large.

Hand Auger Kit

AMS- Look for part number 209.54 but make sure you specify a 60mm auger bit when ordering. 

https://www.ams-samplers.com/

http://www.ams-samplers.com/soil-moisture-sensor-installation-kit.html

Gas Auger

There are only 2 and 3 inch options for gas augers. We recommend the 2 inch option which is shown in the link below. There will likely be play in the 2 inch gas auger bit which will cause the hole to be slightly larger, which is desired in this case.

Parts needed

Company: Earthquake

2" bit- EA2F https://www.getearthquake.com/Product/2186/earth-auger-2-repl-ft-rh-red

43cc One Man Earth Auger- E-43 https://www.getearthquake.com/Product/2515/1-person-earth-auger-powerhead

Earthquake 12" earth Auger Extension shaft https://www.getearthquake.com/Product/2206/12-inch-power-ice-auger-extension

FarmQA Pricing 

• $850 AMS Hand Auger (60 mm bit)
• $1,000 AMS Hand Auger Kit
• $725 Power Auger (2" bit)

Please contact FarmQA Support with any further questions